:: HOME :: Bikes For Sale > 750GT > Forum :: Shopping ::

Ducati 750GT  ~  SOLD  ~
posted 7/15/2018 - sold 11/17/2018
SM01 SM02 SM03 SM04 SM05 SM06

1974 Ducati 750 GT


Frame# 754683, Engine# 755010, Odometer; 18597

Professionally restored at 18293 miles by Steve Munro of Loudbike. Complete disassembly for inspection and restoration. Engine rebuilt by Gerry McDermott of McDermott Brothers Racing. Gerry is the Technical Inspection Coordinator for the Ducati Owners Club of Canada. Low mileage engine but sat idle for 24 years and condition was unknown.


  • Found ~15% load in crank traps

  • Shim crankshaft

  • Replace clutch inner spacer

  • Borgo std. ring set

  • 4 valve guides and seals

  • Re-work valve seats

  • Rocker arms and shim

  • Restore and total rebuild Delorto PHF30 carbs

  • New intake manifold insulators

  • K&N air filter set & oil breather filter, Malossi fuel filters

  • Stator remanufactured with rare earth magnets at Road and Race, Australia.

  • Dyna S ignition and 5ohm coils, leads & boots

  • Correct dummy condenser plugs and stainless points cover posts.

  • New finned exhaust nuts.

  • Conti new original round case muffler set.

  • All frame pieces stripped and powder coated black at RLD

  • New steering head bearings

  • New Marzocchi steering damper, knob

  • Modify steering stops

  • Marzocchi forks rebuilt and new seals

  • New Works fork springs

  • Restore and rebuild front brake caliper and master cylinder

  • New front brake line and rear brake cable

  • Resurface rotor and drum.

  • New brake pads and shoes

  • New swing arm bushings

  • Remanufacture center stand for height

  • Icon 7610-1418 specific order shocks

  • Gold “o” ring chain 530VX-120

  • Titan aluminum rear sprocket 530x36

  • New front sprocket

  • Dunlop Arrowmax GT501; 100/90-19 F, 129/90-18 R

  • Polished Borrani rims

  • Stainless steel spokes from Buchanan

  • Lace, balance and true wheels by Henderson

  • New front and rear wheel bearings.

  • All chrome re-plated by Gary’s Custom Cycle

  • All alloy pieces polished at Gary’s

  • Paint and Pin Striping by Dez at Dez’s Paint Shop

  • Tank interior rust removed by electrolysis

  • New rubber tank mounts

  • Metal cast Ducati tank badges

  • Restore both fuel taps

  • Black Mille fuel cap

  • Seat upholstery at Got it Covered by Gerry

  • New rubber seat bumpers

  • Lo-pro handlebar and mirror

  • New Tomasselli throttle assy., grips, and cables

  • Restore and test speedometer & tach at Stewart-Warner by Gord

  • New instrument bezel rubbers

  • Clutch, Brake, Tach, and speedo cables all renewed

  • Restore original wiring harness

  • All new rubber parts; foot pegs, boots, grommets, ties, and bumpers etc.

  • New side cover badges and edging

  • OE headlamp brackets

Provincial Safety Inspection, Power Sports Canada, August 13, 2014

Ongoing; Chassis & tuning:

  • Swapped fork oil to lighter 7wt.

  • Running Motul 10W50 classic oil

  • New shifter return and detent spring installed

  • Re-jet carbs, 122 mains and 62 Idle

  • Dellorto slides changed to #702

Asking $22,750 USD   SOLD

Shipping available through Bevel Heaven to/from anywhere in the lower 48 states for ~ $703
Click HERE for more info & to purchase the service

Website (C) Frogman Enterprises 2000-present,  All Rights Reserved  21.2K