SOLD     SOLD     SOLD     SOLD

I have decided to sell my latest project, Based on a 1979 Darmah rolling chassis, motor an 860 gt, big bore with the heads flowed.

Bore is 92mm, barrels are actual NCR pieces, pistons are new sourced from old racing spare parts.

NOS Lucas Rita with a new 3 ohm coil (dual outlet) Carbs are new 40mm pumpers, throttle control is from a TZ 250.

Tank and seat were made by me from a mould I have, laid up with vinyl ester (chemically resistant) Bodywork is from Air-Tech (79 NCR replica)

2 into 1 exhaust (very light but do not know the make).

Engine was completely gone thru, all new bearings new Carrillo rods, straight cut primary sourced from Germany.

Heads are externally oiled, with a restrictor.

Bike runs great I have done three track days, bike has a charging system , but no kick start as the shaft was removed.

New foating rotors up front , stock disc on the rear.

$10,000 bike is located in Toronto will crate and ship anywhere.

Will also deliver to the US (Buffalo, Detroit) for shipping purposes.