Steve Allen's DUCATI Bevel Drive Interchangeability List

Below you will find part numbers of "other brand" parts I used to replace original Ducati parts on my SSD and other bevels. There are other useful bevel drive interchangeable listings as well. Whenever possible, I have listed the original Ducati part number, description, other brand name and other brand part number. Colors will be as noted below to make it even easier to understand. Please remember, use non factory parts at your own risk!!!

DARMAH CHAIN BUFFER: D=0801.91.070
Click HERE for information, * I make a suitable replacement for sale & kits for all twins *

Valve Adjuster Nuts & Bolts (860/900cc non desmo heads) > CLICK HERE FOR A PICTURE <
Vite registro (screw) ~ D=0500.92.660 - Porsche 901.105.370.02
Dado esagonale (nut) 8MB x 4 ~ D=0062.54.241 - Porsche 999.034.005.00
The original parts are no longer available but Porsche made similar ones. They can be fitted without modification to other parts although you might loose half a thread since they are not threaded all the way down. Depends on how far your seats have worn I guess. On my 860GTS it's a perfect fit. M.A. van der Heijde [[email protected]]

750 VALVE STEM SEALS: D=0755.92.150
The black valve stem seals with the circular springs and firm sides which grace the guides on the first 500 bevel twin motors can be replaced by a General Motors part GM 902 15296. These are a perfect fit on the longer exhaust guide, but need a little bit of sealant on the shorter guide to ensure adhesion. jeff [[email protected]]

STEERING HEAD BEARINGS - all bevels:
CBF 426-R or SKF 639174 (26 x 52 x 15)
*CBF is an Italian bearing manuf which makes SNR, NSK, RHP, FAG, Torrinton...*

COUNTERSHAFT SPROCKET NUTS - all bevel twins:
*GUK7 SKF nut. Its a nylock version - get rid of the tab washer. Have used them since 10 years and no problems with loose nuts Kent J�rnevall [[email protected]]
Another option; It's a standard locknut, as made by bearing companies. Part number (FAG) is KM7 The associated locking tab washer is MB7 Jordan [[email protected]]
More Info: KM7 sprocket nut (Ducati p/n 0755.16.055) is used on GT, Sport, squarecase SS & Darmah. 900S2 and Mille have different number (76800.3380). I don't know what the difference is. The same lockwasher MB7 is used on all. Looks like KM7, MB7 are universal bearing company codes: SKF & FAG both use them. Jordan [[email protected]]

WHEEL BEARINGS - for 18 inch Borranis and FPS alloy mags
SKF 63004-2RS (size 20 42 16) "I am assured they are the same" Michael Pitts [[email protected]]

OIL PLUG WASHERS - all bevels:
MotorMite 65276 From CAR QUEST (M22mm standard copper oil drain plug)

Champion
1981-79 900SD L-86-C
1982-80 900SS L-82-C
1980-77 900GT,GTS L-86-C
1981-79 Darmah, SSDarmah L-86-C
860,860 GTS L-86-C
All plug gaps .024"

Bosch
860 GT, Electric,860 GTS W8AC W8AP (Platinum)
900S, 900 Darmah W7AC W7AP
900SS, Desmo W5BC W5AP W5AS (Silver Sport)
All plug gaps .020"

Nippon Denso (Hot-U)
Ducati 900 SS, GTS, Darmah W22FS-U W22FS-GU W22FS-ZU
Ducati 864 SS Desmo Darmah W20FP-U
Ducati 860, 860 GT W20FS-U W20FS-GU W22FS-ZU
Ducati 900 SS, GTS, Darmah Plug gap .032"
All others .024

38mm Ceriani FORK SEALS: (Ceriani) 0540.78.360
*YAMAHA YZ-250 3EN-231 45-00 or YZ-400 1W4-23145-LO
*these are non stock replacements - 38 x 50 x 8 so use ONE per leg not two*
*38 x 50 x 7 is original, I stock these now, use 2 per leg as per original*

38mm Ceriani fork seal retainer circlips:
'86-'87 Honda VFR 700 or '87-'90 CBR600 - easier to remove and install than stock

750 Sport Instrument clamps - 1980 BMW automotive air cleaner intake hose clamps

GT Replacement Air Fiters - 0615.27. 275 * FIAAM FL 6179 * FIAT Part # 4110530 * RYCO A134 (RyCo = Oz company - good filters - lotsa dusty roads there)

BATTERY - electric start twins:
Westco SVR20 sealed gel battery
*smaller than stock, 18 AH, 300+ CCA, works fine on my SSD* - I carry these in my store

OIL FILTER - all bevel twins: Kawasaki Z250 16099-004 or Fram CH6070
- I have them in stock for cheap, check out my store...

BRAKE PADS for F08: (Brembo) D=07.2256.30
Galfer 013 G1532 *these are kevlar "greens"*

Please send me an eMail if you have found any other parts that should be added to this list for the benefit of all the "Bevel Heads" out there... Also, please check out the DOC (GB) Interchangeability List for more information.

Chain grinding through your case? Now you can protect your Bevel drive case by purchasing a case saver for your SD/SSD Darmah, 750 GT/Sport/Super Sport, 860 GT/GTS, 900 GTS or 900 Super Sport models. Click HERE for more information!

Ducati Part #	Replacement Brand	Replacement Part #
D=*********	KawahonSuzaha	*********