:: HOME :: Product Info > SS Replica > Forum :: Shopping ::

1978 Ducati Super Sport Replica  ~  SOLD  ~
posted 8/30/2013 - sold 9/17/2013
ducati 1 001 ducati 1 002 ducati 1 006
ducati 1 007  ducati1 002  ducati1 003

SOLD   SOLD   SOLD   SOLD

Hello all,

Selling my bevel DUCATI 900 desmo. All work listed has been done in the last 5,000 miles.

I have been building  bevel ducati's  for over 25 years. I have had the good fortune of knowing some very smart  people including Jimmy Adamo, Leno Reoni and Malcom Tunstall. This bike represents all of that experience. It is no particular year or model. Built in a true cafe' style.  My wife and I are recently retired and are going to travel. Its time to let some one else to take over. No expense has been spared in the building and maintaining of this bike.

  • Akront wheels 2.15 front 2.5 rear with stainless spokes super laced by Woodys wheel works.

  • Cerini front forks with Race tec gold valve cartridge emulators and Works performance springs.

  • Works performance rear shocks.

  • Engine has been blue printed and has a complete rebuild by Malcome Tunstall of Syds cycles all new  bearings, rods, trans gears under cut, 86.5 mm bore, J&E 10.1 pistons, cylinder heads ported and two spark plugs per cylinder,  MBP collets.

  • All new wheel and steering head bearings and new swing arm bushings.

  • Sachse digital ZDG3 ignition with Dyna dual output coils and electronic tech.

  • Sachse digital adjustable voltage regulator.

  • Tommaselli adjustable clip-ons which can be set up high for roadster with no fairing or medium for dunstall 1/2 fairing, or low for SS fairing I have all parts and brackets for either.

  • Solo seat with suede cover also have SS dual seat.

  • New Conti mufflers, also have 2 into 1 racing system.

  • Stainless brake lines with new master cylinder.

  • Hydraulic steering damper set in heim joints.

  • Custom rear brake stay set in heim joints

  • Hydraulic clutch, with Surflex alloy clutch kit and special billet spring plate.

  • One off polished aluminum gas tank also have a fiberglass tank.

  • 520 chain conversion with 15 and 16  tooth front sprockets and 36 and 38 tooth rear sprockets.

Many spares and special tools, including another set of cylinder heads and a set of plasma coated 2 piece aluminum brake rotors and spare cylinders.  It needs tires and there is a crack in the rear fender the result of a unfortunate shipping experience. I have a new fender on the way.

Asking $14,000 with all the spares listed or $12,500 with your choice of tank, seat & exhaust and no spares.

Bike is located in Northern Michigan USA

Shipping available through Bevel Heaven anywhere in the lower 48 states for ~ $603
Click HERE for more info & to purchase the service

Website Frogman Enterprises 2000-present,  All Rights Reserved